Hi, need to submit a 1750 words essay on the topic Lateral Violence in the Emerg

Hi, need to submit a 1750 words essay on the topic Lateral Violence in the Emergency Department.The paper “Lateral Violence in the Emergency Department” talks…

Hi, need to submit a 1750 words essay on the topic Lateral Violence in the Emergency Department.The paper “Lateral Violence in the Emergency Department” talks about the lateral violence as an act of violence against ones’ peers and focuses on lateral violence in the Emergency Departments in the US healthcare system. The lateral violence has increased the prevalence of mental health conditions such as depression and schizophrenia among clinical nurses (Kathryn, 2011). When nurses are not happy their motivation and job satisfaction decrease. Eventually, these lead to higher employee turnover rates which increase the healthcare institution’s expenses and a shortage of staff. Most importantly, lateral violence among nurses has compromised the quality of healthcare service by reducing the levels of optimal patient care. Lateral violence has especially been identified as more prevalent among nurses working in Emergency Departments. There are cases where a nurse has noted an error in medication administered by a fellow nurse but because of lateral violence within that setting that nurse fails to report this error, may be due to fear or revenge, this later leads to aggravated conditions for the patients. Many patients have experienced a relapse in their conditions because one nurse refused to help another nurse claiming to be too busy when their help was needed or sought. Most of the decisions and medications nurses in ED make determine whether a patient lives or dies. It is, therefore, crucial that the incidences of lateral violence between nurses working in the ED be kept at their minimum.
The post Hi, need to submit a 1750 words essay on the topic Lateral Violence in the Emerg appeared first on ELITE ACADEMIC ESSAY.

Prepare and submit a preliminary outline version (approximately 1,000 words) of

Prepare and submit a preliminary outline version (approximately 1,000 words) of what will eventually be your final Module Project report due in Week 7.Your outline…

Prepare and submit a preliminary outline version (approximately 1,000 words) of what will eventually be your final Module Project report due in Week 7.Your outline version this week should contain the following sections:Organisational Profile: what is the name of the organisation you propose to use, where is it located, what is its primary business and approximately how many staff does it employ? (If there are any concerns about any aspect of commercial sensitivity, it is permissible to use an assumed name for the organisation you select).Organisational Structure: how are human and other resources arranged within this organisation, what levels of seniority exist and how are those levels of seniority connected through formal reporting lines? (A structure diagram would be useful here.) To what extent is the decision process centralised in the senior management team, and to what extent is it devolved to lower levels in the organisation?Change Drivers: to what extent does this organisation currently align with the principle of punctuated equilibrium? What are the factors in either or both of the external or internal operating environments that suggest a significant element of change is needed to the way in which this organisation works? Each change driver you identify should be categorised according to the criteria presented in relation to the Week 2 Deseret News case.Key Stakeholders: who are the individuals, groups and organisations who will be most directly affected by the type of change that is indicated by change driver analysis? To what extent do you expect each stakeholder’s reaction to be positive or negative? What are the primary ‘unanswered questions’ that you expect to receive?Change Initiative Overview: what is the primary aim of the change initiative that you recommend be introduced, and how could this initiative be classified in terms of the parameters suggested by Nasim & Sushil? How will success or failure in this initiative be measured? What ethical considerations need to be taken into account as the initiative is designed?
The post Prepare and submit a preliminary outline version (approximately 1,000 words) of appeared first on ELITE ACADEMIC ESSAY.

Submit a 250-word summary of your class notes here. Your notes should NOT be a w

Submit a 250-word summary of your class notes here. Your notes should NOT be a word-for-word transcription of what you find in this section. Instead,…

Submit a 250-word summary of your class notes here. Your notes should NOT be a word-for-word transcription of what you find in this section. Instead, your notes must: 
Address key terms or topics that came up in the course module.
Explain how you think the assigned readings tie-in. Make sure to include the primary reading!
Provide two links to reputable sites that clarify, extend, or correct something you encountered in the course this week. Your links must be accompanied by a summary and evaluation of their content.
To evaluate the content, you must ask yourself: 
Is the author easily identifiable? Can you locate information on the author’s credentials? IF NOT, then the information is less credible.
Does the content include links to outside material? Do the links lead to other credible sites? IF NOT, then the information is less credible.
Does the site have a “last updated” statement? When is it? If it was last updated a long time ago OR does not have a time-stamp, then the information is less credible. 
The post Submit a 250-word summary of your class notes here. Your notes should NOT be a w appeared first on ELITE ACADEMIC ESSAY.

   Find, cite and submit a definition of “personality” that, you find, to be rel

   Find, cite and submit a definition of “personality” that, you find, to be relevant to the interviewing process. In no less than 200 words,…

  
Find, cite and submit a definition of “personality” that, you find, to be relevant to the interviewing process. In no less than 200 words, explain the relevancy and what, if any, the role that personality plays within the conduct of the interview.
The post   
Find, cite and submit a definition of “personality” that, you find, to be rel appeared first on ELITE ACADEMIC ESSAY.

  Submit three article summaries. You must find three different articles from t

  Submit three article summaries. You must find three different articles from three different sources that pertain to business. Articles must be dated within one…

 
Submit three article summaries.
You must find three different articles from three different sources that pertain to business. Articles must be dated within one month from the present. For the assignment, please type a one page, double-spaced summary in your own words. The summary must include the name of the source, title of article, author, date, and page number
The post  
Submit three article summaries.
You must find three different articles from t appeared first on ELITE ACADEMIC ESSAY.

  Descriptive Paragraph Instructions You are required to submit the FINAL copy o

  Descriptive Paragraph Instructions You are required to submit the FINAL copy of this assignment, but you may first submit an optional DRAFT. This will…

 
Descriptive Paragraph Instructions
You are required to submit the FINAL copy of this assignment, but you may first submit an optional DRAFT. This will allow you to receive qualitative feedback that can inform your revision. You should always avoid focusing solely on the grader’s DRAFT feedback; use the feedback as a supplement to the course lessons and your own revision ideas. Always expect to revise beyond what the DRAFT grader specifically notes.
Outdoor Experience Description – Detail a real or imaginary experience walking through an outdoor event or activity, such as a zoo, open-air market, festival, etc.
You only need to develop one paragraph for this assignment, but it should include many sensory details and directional transitions. Start with a topic sentence, which will also serve as the thesis statement, that explains the exhibition you are experiencing as well as mentions how the adventure ignites your senses. In the sentences following, describe your journey. What do you see? Hear? Feel? Smell? Taste? Where are these experiences located (directional transitions)? To the right? Just above? The reader should be able to build the environment around you and take part in the sensory experience you illustrate as he or she reads along, so be as descriptive as necessary, touching upon all five senses within the body paragraph. Finally, complete your paragraph with a concluding sentence that summarizes your outing, and make sure it has a point! In other words, what did you take away from this excursion?
Sample thesis statement: As I walk toward the Brookfield Zoo entrance gate for my first zoo experience, I notice a flurry of lively activity in front of me, so on my way to the gorilla den, I can feel my excitement building, and as I get closer, the sounds and smells strengthen, making the chill of my cold beverage much more apparent; I hope I am ready for this.
Notes
·         You can use either past or present tense verbs to describe your experience in this assignment, but avoid unnecessary tense shifts.
·         In addition to directional transitions, be sure to use standard transitions between sentences where applicable so that your ideas are fluid from start to finish.
Format Requirements:
Header: Include a header in the upper left-hand corner of your writing assignment with the following information:
Your first and last name 
Course Title (Composition I) 
Assignment name (Descriptive Paragraph) 
Current Date
Page Layout:
MLA style documentation (please see the tutorial in the course topic)
Last name and page number in upper-right corner of each page 
Double-spacing throughout
Title, centered after heading
Standard font (Times New Roman or Calibri)
1″ margins on all sides
Save the file as .docx  or  .doc format
Length: This assignment should be at least 10-12 sentences in a single paragraph.  
The post  
Descriptive Paragraph Instructions
You are required to submit the FINAL copy o appeared first on ELITE ACADEMIC ESSAY.

Submit data on Uganda with explanation GDP (current US$) Population, total GDP

Submit data on Uganda with explanation GDP (current US$) Population, total GDP per capita (current US$) FDI Inflows FDI Outflows Balance of Payments Imports Exports…

Submit data on Uganda with explanation
GDP (current US$)
Population, total
GDP per capita (current US$)
FDI Inflows
FDI Outflows
Balance of Payments
Imports
Exports
Industry Ratios, Intra-industry, etc.
Quotas and Tariffs
The post Submit data on Uganda with explanation
GDP (current US$)
Population, total
GDP appeared first on ELITE ACADEMIC ESSAY.

Instructions:  Submit your answers to the scenario in a Word document.  Make sur

Instructions:  Submit your answers to the scenario in a Word document.  Make sure you answer all parts of the question to receive full credit.  Each…

Instructions:  Submit your answers to the scenario in a Word document.  Make sure you answer all parts of the question to receive full credit.  Each answer should contain a minimum of four sentences. 
The following case, which resulted in a complaint to the HHS Office for Civil Rights with a subsequent investigation and corrective action, demonstrates that HIPAA privacy violations can readily occur with paper health records and by small providers that may seem to operate under OCR’s radar.  It also demonstrates that health consumers are often aware of HIPAA violations when they see them, and they do take action:
A dental office was in the practice of flagging some of its medical records with red stickers containing the word “AIDS” on the outside cover.  Further, office staff handled the records in a manner such that other patients and staff could read the stickers, even though they had no reason to know about the patients’ diagnoses.
1.  What HIPAA violation(s) can be identified in this scenario?
2.  What are some ways to identify records of AIDS patients to safeguard staff while also maintaining the privacy of the patients?  
3.  As a representative of the Office for Civil Rights, what corrective action steps would you require the dental practice to make?  Create these steps.
4.  What other types of mitigation could the dental practice employ?  
5.  Presume that this office had electronic health records instead of paper records.  Would the risk of a privacy violation be as great?  How could records of AIDS patients be identified to safeguard staff, while also maintaining the privacy of the patients? Construct these methods
The post Instructions:  Submit your answers to the scenario in a Word document.  Make sur appeared first on ELITE ACADEMIC ESSAY.

   SUBMIT ASSIGNMENT 1 Assignment 1: LensCrafters Case Study Due Week 4 and wort

   SUBMIT ASSIGNMENT 1 Assignment 1: LensCrafters Case Study Due Week 4 and worth 250 points  This assignment requires students complete an analysis of the…

  
SUBMIT ASSIGNMENT 1
Assignment 1: LensCrafters Case Study Due Week 4 and worth 250 points  This assignment requires students complete an analysis of the LensCrafters case from Chapter 6 of the text.   Write a six to seven (6-7) page paper in which you:
Evaluate LensCrafters’ operations strategy and explain how the organization seeks to gain a competitive advantage in terms of sustainability.
Analyze how operation management activities affect the customer experience. Select two (2) operation management challenges and provide the solutions for confronting them.
Examine LensCrafters’ value chain and evaluate its effectiveness to operations in terms of quality, value creation, and customer satisfaction.
Determine the different types of performance measurements that can be used to measure LensCrafters’ service-delivery system design. Select at least two (2) types that can be applied and provide justifications for the selection.
Examine the different types of technologies applied to LensCrafters’ service operations and evaluate how the technologies strengthen the value chain.
Use at least three (3) quality resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.
Your assignment must follow these formatting requirements:
This course requires use of Strayer Writing Standards (SWS). The format may be different than other Strayer University courses. Please take a moment to review the SWS documentation for details (more information and an example is included in the Strayer Writing Standards left menu link).
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
The specific course learning outcomes associated with this assignment are:
Apply the concept of operations management.
Compare and contrast the difference between a supply chain and a value chain.
Analyze the types of measures used for decision making.
Analyze the five key competitive priorities and their relationship to operations strategy.
Analyze different types of technology and their role in manufacturing and service operations.
Use technology and information resources to research issues in operations management.
Write clearly and concisely about operations management using proper writing mechanics.
Click here to view the grading rubric for this assignment.
CASE STUDY INFO BELOW:  
6-6 An Integrative Case Study of LensCrafters
to illustrate how goods and services are designed in an integrated fashion, we will study LensCrafters—a well-known provider of eyeglasses produced “in about an hour.” We use the framework for goods and service design shown in Exhibit 6.1.
Steps 1 and 2—Strategic Mission, Market Analysis, and Competitive Priorities
LensCrafters (w­w­w­.­l­e­n­s­c­r­a­f­t­e­r­s­.­c­o­m) is an optical chain of about 860 special service shops with on-site eyeglass production capabilities in the United States, Canada, and Puerto Rico. All resources necessary to create and deliver “one-stop-shopping” and eyeglasses “in about an hour” are available in each store.LensCrafters’ mission statement is focused on being the best by
creating customers for life by delivering legendary customer service,
developing and energizing associates and leaders in the world’s best work place,
crafting perfect-quality eyewear in about an hour, and
delivering superior overall value to meet each customer’s individual needs.21
Step 3—Customer Benefit Package Design and Configuration
Our perception of the LensCrafters customer benefit package is the integrated set of goods and services depicted in Exhibit 6.11. The primary good (eyewear) and the primary service (accurate eye exam and one-hour service) are of equal importance. Peripheral goods and services encircle the primary ones to create “a total LensCrafters’ experience.”
Steps 4a and b—Manufactured Good Design and Process Selection
The manufacturing process is integrated into the service facility to provide rapid order response, yet not sacrifice quality. In this industry, it is unusual for customers to watch their eyeglasses being made and this “service experience” is viewed as adding value. The equipment used in the labs is the most technologically advanced equipment in the industry. The eyewear is manufactured to specifications in a clean, modern, and professionally run facility.Other issues that LensCrafters would need to consider in designing its manufacturing processes are the following:
How are eyeglass lenses and frames ordered? Are these materials ordered by individual stores or consolidated by region/district? How can the high quality of eyewear be ensured? What new materials are available?
What items should be stored at the region/district warehouse and stores? What type of purchasing and inventory control systems should be used? How should supplier performance be evaluated?
What eyewear-making equipment should be used? What is the latest technology? Which equipment is most flexible? Should the equipment be purchased or leased? How should it be maintained and by whom?
What is the most efficient production procedure to make the goods and meet time schedules? Where should quality be checked in the manufacturing process?
Step 4c—Service-Delivery System Design
The service-delivery system, as evidenced by the location and layout, servicescape, service processes, job designs, technology, and organizational structure, is combined into an integrated service-delivery system. LensCrafters’ stores are located in high-traffic areas such as shopping centers and malls within 5 to 10 miles of the target market.A typical store layout is shown in Exhibit 6.12. The servicescape is designed to convey an impression of quality and professionalism. The store is spacious, open, clean, carpeted, with professional merchandise display areas, modern furniture in the retail area, and modern equipment in the laboratory, technicians in white lab coats, shiny machines in the lab, and bright lights throughout. The store display cases, eye examination areas, and fitting stations are in the high-contact area where customers and service providers interact frequently. Optometry degrees, certifications, and licenses hanging on the wall provide physical evidence of employees’ abilities.A greeter directs each customer to the appropriate service area as he or she enters the store. The low contact area of a LensCrafters store—the optical laboratory—is separated from the retail area by large glass panels. The optical laboratory becomes a “showroom” where the customer’s perception of the total delivery process is established.The store is a service factory. The typical service process begins when a customer makes an appointment with an optician and continues until the eyeglasses are received and paid for. Between these two events, the customer travels to the store, parks, receives a greeting from store employees, obtains an eye examination, selects frames, is measured for proper eyeglasses and frame fit, watches the eyeglasses being made in the laboratory, and receives a final fitting to make sure all is well. Information flow in the forms of prescriptions, bills, and receipts complements the physical flows of people and eyewear.
Step 4d—Service Encounter Design
Each job at LensCrafters—sales associate, lab technician, and doctor of optometry—requires both technical skills and service management skills. Associates are well trained, friendly, and knowledgeable about their jobs. The lab technicians are certified in all work tasks and processes. Many associates are cross-trained.At the service-encounter level, key issues that managers need to consider include the following:
What human resource management processes and systems will ensure hiring the right people, training them properly, and motivating them to provide excellent service? What recognitions and rewards should be provided?
How are associates trained to handle service upsets and service recovery?
What standards should be set for grooming and appearance?
What behavioral standards, such as tone of voice, physical mannerisms, and the words that associates use in customer interactions, should be set?
How should employee performance be measured and evaluated?
What can be done to make the one-hour wait a positive experience for customers?
LensCrafters reinforces its customer benefit package with a comprehensive 30-day unconditional service guarantee design defined as follows:You buy a pair of glasses at LensCrafters and then you think, ‘Maybe red’s not my color.’ Or, you question, ‘Wow, should I have gotten the antireflective coating?’ Or after wearing them for a while you realize, ‘These really aren’t going to be comfortable enough to wear every day.’Whatever your reason, if you don’t completely love your eyeglasses or prescription sunglasses, you can exchange or return them for a full refund at LensCrafters—no excuses, no explanations. That’s what our 30-Day Unconditional Guarantee is all about—giving you peace of mind with every pair.So how does it work? Simple. Just return your eyeglasses—in their original condition—to LensCrafters within 30 days. We’ll exchange them for a new pair or refund your money. Why do we do it? Because LensCrafters stands behind each and every pair of our glasses. And we want to make sure you simply love them.What does ‘Unconditional’ really mean? The 30 days begins on the date you actually receive your eyeglasses.You can return or exchange your new eyewear as many times as needed within the 30-day time period. However, the 30 days does not start over with each return or exchange.If you exchange your purchase for a pair at a lower price, we’ll refund the price difference.If you exchange your purchase for a pair at a higher price, you’ll only pay the price difference.If your eyeglasses get broken, you can use our 1-Year Replacement Discount.22
Steps 5 and 6—Market Introduction/Deployment and Evaluation
Although the company has been around for some time, it undoubtedly faces challenges in replicating its design concept in new locations. On a continuing basis, as technology and procedures change, LensCrafters will have to develop processes to introduce changes into all existing locations to maintain operational consistency and achieve its strategic objectives. For example, how might it react as competitors such as Walmart enter the optical industry?As you see, LensCrafters, manufacturing and service design depends on a variety of operations management concepts, all of which are integrated and support a rather complex customer benefit package.
Discussion Questions
1.How might today’s technology, such as the Internet, be used to understand the voice of the customer?2.What lessons can be learned from the LaRosa’s Pizzeria boxed example?3.In building a House of Quality, what departments or functions should be involved in each step of the process?4.Explain how the goal-post view of conforming to specifications differs from Taguchi’s loss function. Would you rather buy an automobile where suppliers used the goal-post or Taguchi models? Why?5.Propose an explicit service guarantee for an airline. Clearly explain why you included the features of your service guarantee (maximum of one page). Do you think that an airline would adopt it? Why or why not?
Problems and Activities
Note: an asterisk denotes problems for which an Excel spreadsheet template in the Premium Online Content may be used.1.Build a House of Quality (showing only the voice of the customer, technical features, interrelationships, and relationship matrix from Exhibit 6.2) for designing and producing chocolate chip cookies. The voice of the customer consists of:a.Softb.Freshc.Bittersweetd.Not burnede.Large sizef.Moderate priceg.Lots of chocolateThe technical features identified are:a.Baking temperatureb.Baking timec.Type of chocolated.Proportion of chocolatee.Sizef.Shapeg.Thicknessh.Batch sizei.Amount of preservativesClearly explain your reasoning for your ratings of the interrelationships and relationship matrix. Can you think of other technical features that should be included to better address the voice of the customer?2.*Suppose that the specifications for a part (in inches) are 6.00 ± 0.05, and that the Taguchi loss function is estimated to be L(x) = 6,500 (x – T)2. Determine the economic loss if x = 6.07 inches.3.*A quality characteristic has a design specification (in cm.) of 0.200 ± 0.020. If the actual process value of the quality characteristic exceeds the target by 0.020 on either side, the product will require a repair of $50. Find the value of k and state the Taguchi loss function. What is the economic loss associated with x = 0.015?4.*For the situation in problem 3, what are the economic design specifications if the cost of inspection and adjustment is $7.50?5.*Suppose that the design specifications for a hydraulic cylinder are 10.00 ± 0.10 centimeters, and that the Taguchi loss function is estimated to be L(x) = 2,400 (x – T)2.a.Determine the estimated loss for a production order if the quality characteristic under study takes on a value of 10.04 and 100 parts are produced.b.Assume the production process is recalibrated weekly and a new sample of cylinders after recalibration reveals an x-bar of 9.789. What action, if any, is need in this situation? Explain.6.The service center for a brokerage company provides three functions to callers: account status, order confirmations, and stock quotes. The reliability was measured for each of these services over one month with these results: 90 percent, 70 percent and 80 percent, respectively. What is the overall reliability of the call center?7.Two cooling fans are installed in some laptop computers. Suppose the reliability of each cooling fan is 0.99. What percent improvement in reliability does adding the second fan provide?8.Given the following diagram, determine the total system reliability if the individual component reliabilities are: A = 0.98, B = 0.92, and C = 0.85. (Hint: Use Equations 6.2 and 6.3 and note that the reliabilities of the parallel components are different.)
9.A simple electronic assembly consists of two components in a series configuration with reliabilities as shown in the figure below.
Engineers would like to increase the reliability by adding additional components in one of the two proposed designs shown in the figure on the next page (notice the difference in the diagram design with respect to being in series and parallel):
a.Find the reliability of the original design.b.Explain how the configurations of the proposed designs differ.c.Which proposed design has the best reliability?10.Research and write a short paper (maximum two typed pages) illustrating an example of how a company applies concepts of Design for Environment (DfE).11.Choose a servicescape for a business with which you are familiar and list key physical attributes of the servicescape using the three subdimensions, and discuss their impact on customer service and value. Explain how the servicescape establishes the behavioral setting for your example.12.Select a service at your school, such as financial aid, bookstore, curriculum advising, and so on. Propose a redesign of this service and its service-delivery system. First, baseline the current service and system, and then suggest how to redesign and improve it. Make use of chapter ideas as best you can.13.Identify a job in an organization and describe how the four elements of service-encounter design are designed and managed for this job. (The job you select could be in a professional organization such as a dentist or tax advisor, or in a routine service organization such as a hotel check-in desk clerk or airline flight attendant.)14.When Walt Disney created the Disney empire in the 1950s, he forbid its star characters such as Mickey Mouse and Pluto to talk. Mr. Disney thought it would be too difficult to control the service encounters between customers and Disney characters, and it would ruin the ‘magic’ of Disney. Therefore, Disney characters were trained to gesture and use only their body language to interact and entertain guests. Today, Disney is experimenting with talking characters. What are some advantages and disadvantages of talking Disney characters from a service design perspective? Research the current status of this Disney design decision and include a brief summary in your write-up (no more than two typed pages).15.Identify a service-provider job and associated service encounters and design and write a job description for it. (Consider desired customercontact skills and behaviors, education and training requirements, empowerment capabilities, hiring criteria, and so on.) 
The post   
SUBMIT ASSIGNMENT 1
Assignment 1: LensCrafters Case Study Due Week 4 and wort appeared first on ELITE ACADEMIC ESSAY.

i want to submit argument essay so can you help me like mla styleand i alredy at

i want to submit argument essay so can you help me like mla styleand i alredy attach what i need to submit and how The…

i want to submit argument essay so can you help me like mla styleand i alredy attach what i need to submit and how
The post i want to submit argument essay so can you help me like mla styleand i alredy at appeared first on ELITE ACADEMIC ESSAY.